Pen heat press machine for pen printing 6 pieces PP-10A
- Type of machine: manual, multifunctional
- Dimensions of the heater: 15 * 10cm Pen Heater + Pen Base (6 pieces at a time)
- Controller: GY10 Digital Time & Control Temp
- Printable articles: Thickness up to 13 mm
- Under plate: interchangeable
- Gas spring: 20kg \ ¢ 15 \ 164MM * 1pc
- Opening angle: 45 degrees
- Voltage: 120V / 220V
- Heating time at 200 ℃: about 5 minutes
- Power: 350W
The PP-10A pen hot stamping machine has been specially designed for sublimation pen printing. With the 150 * 100mm pen heating element and the 150 * 100 * 10mm silicone basal mold, the pen can transfer 6 pens at a time. Heating from 0 to 200 ℃, takes only 5 minutes. Designed by the senior engineer Microtec, Mr. Lu, the pen is small and refined.
For the pen heat press, it is also possible to use it as a 4-in-1 combined heat press, including cup heat press, capsule heat press, flat heat heat press (with 11-ounce heater, 15x15 cm flat heater and heater). Please refer to Microtec PP-10E mini-sublimation heat press.
* Pens 6 pieces per transfer
* Small and elegant Hobby Press
* New original Microtec design
* First-class production technology
* Small and elegant Hobby Press
* New original Microtec design
* First-class production technology
| Model number: | PP-10A |
| Type of machine | Manual, Clamshell |
| Plate size | Pen heater 15 * 10 cm + pen base (6 pieces at a time) |
| ticket inspector | GY-10 Digital Time & Temp. Control |
| Under the plate |
interchangeable |
| Gas spring | 20kg \ ¢ 15 \ 164mm * 1pc |
| Printable articles | Thickness up to 13 mm |
| Opening angle | 45 degrees |
| Heating time at 200 ℃ | About 5 minutes |
| Voltage | 110V / 220V |
| Power | 350W |
| Frequency | 50HZ / 60HZ, current 6A |
| Time lapse | 0-999 Sec. |
| Maximum temperature | 225 C |
| Temperature accuracy | ± 5 ℃ |
| Machine Cut it | 448 * 257 * 365 mm |
Microtec's primary service goal is to support all of our customers, could deal with their heat transfer business without interruptions.
So Microtec offers FREE SPARE PARTS with quantity order and the following warranty:
*Free lifetime technical support on all heat presses.
*Two-year warranty on entire machine.
*Five-year warranty on castings and welds.
*Five-year warranty on heat platen.
*Half- year warranty on mug, plate and cap heaters.
So Microtec offers FREE SPARE PARTS with quantity order and the following warranty:
*Free lifetime technical support on all heat presses.
*Two-year warranty on entire machine.
*Five-year warranty on castings and welds.
*Five-year warranty on heat platen.
*Half- year warranty on mug, plate and cap heaters.
For pen sublimation printing, 6 pieces of pen at a time.
