Home > Products > Auto Open Heat Press > SWH-2 Automatic Heat Press Mac.....
SWH-2 Automatic Heat Press MachineSWH-2 Automatic Heat Press MachineSWH-2 Automatic Heat Press Machine

SWH-2 Automatic Heat Press Machine

  • Plate Size:15”*18”,18”*21” Membrane Plate
  • Controller: Digital Temp and Time Controller
  • Voltage&Power:120V/1750W,220V/1800W
  • Time:0-480 sec.
  • Maximum Temp: 225?
  • Temperature Accuracy: ±0.5%
  • Time Range:0-480 seconds
  • Packing:95*60*72cm
  • Gross Weight:59kg     

New fashionable design SWH-2 auto-open clamshell heat press opens automatically and without needing an air compressor. It utilizes an electronically activated, mechanical latch release mechanism with a gas shock assist to guarantee auto-opening. 

Auto-Opening heat transfer machine, requiring no air feed, this Semi-Automatic press utilizes an electronic release mechanism with a gas shock assist to guarantee opening at the end of the print cycle. With emergency open button, floating head design to ensure even contact. Six exchangeable under plate with rapid  screw fitting. Gas spring control, teflon covered heating plate to protect the fabric and to easily clean. Transfer T-shirts, solid matter, tricots etc.

The most valuable characteristic of this machine is its interchangeable lower platen with easy & quick pin-release,which could ensure you to do any sizes of materials sublimation easily. It is suitable for both home and commercial use.

 

Plate Size:15”*18”,18”*21” Membrane Plate
Controller: Digital Temp and Time Controller
Voltage&Power:120V/1750W,220V/1800W
Time:0-480 sec.
Maximum Temp: 225?
Temperature Accuracy: ±0.5%
Time Range:0-480 seconds
Packing:95*60*72cm
Gross Weight:59kg

Exchangeable Under Plate 
4.7''x4.7'' Plate   
6''x9.85'' Plate 
5.5''x15'' Plate  
4.7''x17.3'' Plate 
18''x21'' Membrane Basis Plate


Each Signle Copper sheathed heating rod is tested before it is cast in an aluminum alloy or Mica Sheet. These heating rods are comparable to those found in industrial ovens that heat up quickly, work efficiently and last many years. With our industrial quality heat castings, you can get five years worry free warranty.



All Microtec heat presses are strictly tested under the following procedures before shipping out.

1) Turn on the machine, let it heating up to 200 degree Celsius.

2) Keep the temperature stay at 200 degree Celsius for at least 20 minutes

 

All the machines are packed in carton with full wrapped styrofoam and there are manual instructure offered for each set of machine.



Microtec Technology Co., Ltd

Tel:+ 86-755-28220535 ext 805

Contact Person:Riva

Send your inquiry directly to us
( 0 / 3000 )