SENKO-20/30 Auto Open Heat PressSENKO-20/30 Auto Open Heat PressSENKO-20/30 Auto Open Heat Press

SENKO-20/30 Auto Open Heat Press

  • Model No.: SENKO-20/ SENKO-30
  • Plate Size: 16"*20"/ 20"*32"
  • Controller: Digital Temp. and Time Controller
  • Voltage & Power: 120V/ 1750W, 220V/ 1800W
  • Maximum Temp.: 225C
  • Temperature Accuracy: ±0.5%
  • Time Range: 0-480 Seconds
  • Packing: 96*64*81cm/ 94*91*76cm
  • Gross Weight: 82kg/ 95kg
This heat press is ideal for heat applying transfers to such items as t-shirts, jackets, mouse-pads, tile and more. Especially popular in Europe countries. It is heavy duty and equipped with an automatic digital timer. This model is our most popular heat press! When the upper platen is lowered by hand, it will trip a micro switch while it closed, and the time will count down automatically. Six exchangeable under plate available.
Quick disconnect design allows both platens to be changed in less than 5 minutes.

 Model No.  SENKO-20/ SENKO-30
 Machine Type  Auto Release, Clamshell
 Platen Size  16"*20"/ 20"*32"(40*50cm/ 50*80cm)
 Under Plate  Draw-out & Exchangeable
 Controller  GY-04 Digital Time & Temp. Control
 Printable Articles  Up to 15mm Thickness
 Opening Angle  25 Degrees
 Gas Spring Control  Yes
 Voltage  120V/ 220V
 Power  1800W/ 3600W
 Time Range  0-999 sec.
 Maximum Temp  225 C
 Temperature Accuracy  ±0.5%
 Packing Size  96*64*81cm/ 94*91*76cm
 Gross Weight  82kg/ 95kg

Each Signle Copper sheathed heating rod is tested before it is cast in an aluminum alloy or Mica Sheet. These heating rods are comparable to those found in industrial ovens that heat up quickly, work efficiently and last many years. With our industrial quality heat castings, you can get
five years worry free warrant

All Microtec heat presses are strictly tested under the following procedures before shipping out.
1) Turn on the machine, let it heating up to 200 degree Celsius.
2) Keep the temperature stay at 200 degree Celsius for at least 20 minutes

All the machines are packed in carton with full wrapped styrofoam and there are manual instructure offered for each set of machine.

Microtec's primary service goal is to support all of our customers, could deal with their heat transfer business without interruptions.

So Microtec offers FREE SPARE PARTS with quantity order and the following warranty:


* Free lifetime technical support on all heat presses.


* One-year warranty on entire press & parts.


* Five-year warranty on castings and welds.


* Five-year warranty on heat platen.


* Half- year warranty on mug, plate and cap heaters.

Micktek Technology Co., Ltd.

Tel:+ 86-755-28220390 ext 806

Contact Person:Riva

Send your inquiry directly to us
( 0 / 3000 )